ABOUT
THOMAS BELL-WRIGHT INTERNATIONAL CONSULTANTS
Since 1995 we have provided our specialist knowledge and expertise on over 1,000 of the region’s major architectural projects.
Thomas Bell-Wright International Consultants is a Dubai-based, multi-accredited and privately held engineering firm providing independent Testing, Inspection and Certification (TIC) services primarily for the building construction sector.
Mainly focused on large commercial buildings we provide a range of TIC services for building architectural elements, as well as for fire separation and material safety.
The year 2019 marks our 24th year in business in Dubai.
Recently relocated to larger premises in Jebel Ali Industrial Area 1, we hold accreditations to ISO 17025 (Testing Lab), ISO 17020 (Inspections), ISO 17065 (Certification Body) and AC291 (Special Inspections Agency) variously provided by UKAS (United Kingdom Accreditation Service, IAS (International Accreditation Service from the USA) and GAC (Gulf Accreditation Centre).
Our scope under each standard and Accreditation Body is available on their respective websites:
UKAS
ISO 17025 Laboratory 4439
ISO 17065 Certification Body 6762
GAC
ISO 17025 Laboratory ATL 0017
IAS
ISO 17025 Laboratory TL-626
ISO 17020 Inspection Body AA-748
AC 291 Special Inspections Agency SIA-211
EIAC
ISO 17025 Laboratory 188-LB-TEST
Between our different departments, Curtain Wall Testing, Façade Consulting, Fire Compliance, Administration, and Management, we are a close team of over 100 people.
Thomas Bell-Wright International Consultants is a Dubai-based, multi-accredited and privately held engineering firm providing independent Testing, Inspection and Certification (TIC) services primarily for the building construction sector.
Mainly focused on large commercial buildings we provide a range of TIC services for building architectural elements, as well as for fire separation and material safety.
The year 2019 marks our 24th year in business in Dubai.
Recently relocated to larger premises in Jebel Ali Industrial Area 1, we hold accreditations to ISO 17025 (Testing Lab), ISO 17020 (Inspections), ISO 17065 (Certification Body) and AC291 (Special Inspections Agency) variously provided by UKAS (United Kingdom Accreditation Service, IAS (International Accreditation Service from the USA) and GAC (Gulf Accreditation Centre).
Our scope under each standard and Accreditation Body is available on their respective websites:
UKAS
ISO 17025 Laboratory 4439
ISO 17065 Certification Body 6762
GAC
ISO 17025 Laboratory ATL 0017
IAS
ISO 17025 Laboratory TL-626
ISO 17020 Inspection Body AA-748
AC 291 Special Inspections Agency SIA-211
EIAC
ISO 17025 Laboratory 188-LB-TEST
Between our different departments, Curtain Wall Testing, Façade Consulting, Fire Compliance, Administration, and Management, we are a close team of over 100 people.
SERVICES
FAÇADE CONSULTING
FAÇADE CONSULTING describes a range of services both during the design or pre-tender stage, called Pre-Construction, and during the actual construction called Post-Award or Construction Phase Services. Pre-tender work typically comprises advising the architect/ engineer during the concept design phase, providing the technical review of tenders.
CURTAIN WALL TESTING
CURTAIN WALLS have to keep the weather out and the people in. We provide design review (“Façade Consulting”) and full-scale testing to make sure that these systems do this reliably for the life of the building. Premature failure is likely to dramatically reduce building life because replacement or repair is a massive undertaking requiring a vacant building, extensive exterior access and replacement of all interior finishes in perimeter rooms. For this reason prudent developers insist on having an independent Façade Consultant on board and ‘Mock-Up’ Testing for all their tall buildings.
FIRE COMPLIANCE
FIRE TESTING, INSPECTION AND CERTIFICATION for passive fire protection systems – the materials of the building as opposed to the alarms, signs and sprinklers that activate when there is a fire – are critical to building safety. We provide all three with accreditation to an impressive range of UK, US and EU fire test standards. We are by far the largest fire testing laboratory in the wider region.
OTHER TESTS
ACCREDITATION
We are accredited for a large number of curtain wall tests and fire tests to a range of standards from the UK, the US and Europe. Our scope under each standard and Accreditation Body is available on their respective websites that you may visit below:
UKAS
ISO 17025
Laboratory 4439
Laboratory 4439
ISO 17065
Certification Body 6762
Certification Body 6762
GAC
GCC Accreditation Center
GAC
Testing
ISO/IEC 17025:2005
ATL 0017
ATL 0017
IAS
ISO 17025
Laboratory
TL-626
Laboratory
TL-626
ISO 17020
Inspection Body
AA-748
Inspection Body
AA-748
ISO 17020
Special Inspections Agency
SIA-211
Special Inspections Agency
SIA-211
EIAC
ISO 17025 Laboratory
188-LB-TEST
188-LB-TEST
CLIENTS
Since 1995 we have provided our specialist knowledge and expertise on over 1,000 of the region’s major architectural projects.
TESTIMONIALS
Having worked on many prestigious projects, our Clients have always been satisfied with our input and have always recommended us for more. We are proud to present some of our Clients’ testimonials under Facade Consulting, Curtain Wall Testing and Fire Testing.
Previous
Next
